Rexmoi 90/28 Dehydrator

The High-Spec Rexmoi 90/28 removes moisture 40% faster, up to 28 litres per hour, thanks to a 66% larger compressor and 33% larger coils. 700kg per cycle is achievable.

Create optimal drying recipes with the user-friendly touch-screen. Create multi-step recipes with options for preheating, humidity-controlled drying, kill stage, and cooling.

This dryer takes three trolleys, providing 90m² of drying surface with 150 wire mesh trays; other tray or bin options are available.

The dryer has a forklift-friendly galvanised steel base with urethane-insulated panels. All internal surfaces are stainless steel, which meets food-grade requirements.

The stainless-steel trays slide into heavy-duty stainless steel trolleys to enable the product to be easily moved in and out of the drying chamber. A counter-balanced ramp allows easy loading and unloading of trolleys from the dryer.

The advantage Rexmoi dryers offer is the level of control and data feedback you have.
With this information, you can create the ideal drying recipe to achieve the lowest energy cost, balanced with the quickest drying time while maintaining excellent quality.

Specifications

External Size: 4.5m long x 1.2m wide x 2.4m high (internal 5m³)
Minimum floor area required: 7.5m long x 2m wide
Weight: 1600kg
Capacity: Up to 700kg of product, 90m² surface area
Power supply: 400v, 20 amp, 5 pin, 3-phase power
Air flow: 6000m3/hr (1.5 cubic meters per second)
Temperature range: 5° to 70°C
Optional trolleys: 3

Each trolley has either:

  • 50x wire mesh trays or flat trays
  • 12x draw trays
  • 4x large bins

Want to try before you buy?

New Zealand Made Customised drying solutions

New Zealand Made

Customised drying solutions

Energy Efficient

Energy Efficient

Closed loop heat pump technology

Low Temp Dehydration

Low Temp Dehydration

Retain the best colour & nutrition

3 Innovative Trolley Options To Suit Your Product

Our patented design trolleys were created with versatility and efficiency in mind.
The tray/bin quantities shown below are per trolley. Each 90m2 Rexmoi® dehydrator system comes with 3 trolleys.

Drawer Trays Commercial Dehydrators

Drawer Trays

Qty: 12
Size: 600mm x 980mm x 90mm
Use: nuts, berries, leafy products

These drawers have been especially designed to force evenly distributed air flow down through the product. There are 12 drawers per trolley.

Bin Trolleys Commercial Dehydrators

Bin Trolleys

Qty: 4
Size: 600mm x 980mm x 300mm
Use: herbs, leaves, bulky products

These bins allow for bulky products such as leaves, designed to evenly distribute air flow through the product. There are 4 bins per trolley.

Wire or Flat Trays for Commercial Dehydrators

Wire or Flat Trays

Qty: 50
Size: 600mm x 980mm x 15mm
Use: fruit, veggies, meat, pet food

These trays allow the air flow to go over the product, rather than through it. There are 50 trays per trolley, providing 90m2 of drying area over the three trolleys.